|
DuPont Zodiaq® quartz surfaces are very
easy to maintain. The quartz used in Zodiaq®
- coupled with high-performance,
stain-resistant polymers - results in a
durable, nonporous, chemical-resistant
surface. Zodiaq® is also heat- and
scratch-resistant, but not heat- and
scratch-proof. Therefore, the use of a
cutting board is recommended when using a
knife.
Of course, Zodiaq® keeps its lustrous gloss
and ultra-smooth surface without polishing.
Because it is nonporous, Zodiaq® does not
require sealants or waxes.
Zodiaq® also gives you peace of mind. In the
unlikely event that you do experience any
problems due to a manufacturer's defect, you
can rest assured that DuPont backs Zodiaq®
with a 10-year limited warranty.
Routing Care
With simple care, Zodiaq® will retain its
radiant, lustrous appearance for many years.
For routine cleaning, use a damp cloth or
paper towel and, if necessary, a small
amount of non-bleach, nonabrasive cleanser.
Even though Zodiaq® resists permanent
staining when exposed to liquids (such as
wine, vinegar, tea, lemon juice and soda) or
fruits and vegetables, wipe up food and
liquid spills as soon as possible.
For stubborn or dried spills, use a
nonabrasive cleaning pad such as a white 3M
Scotch-Brite®* scrub pad coupled with
Formula 409® Glass & Surface Cleaner** or a
comparable cleaning product.
Avoid using cleansers that contain bleach.
Always follow the cleaner manufacturer's use
instructions and exercise proper care when
handling and storing any cleaning products.
* Scotch-Brite® is a registered trademark of
the 3M Company.
**Formula 409® Glass & Surface Cleaner is a
registered trademark of the Clorox Company.
Preventing Heat and other damage
Zodiaq® can withstand exposure to normal
cooking temperatures from pots, pans and
dishes without being damaged. To maintain
the beauty of Zodiaq®, do not place hot
skillets or roasting pans directly onto the
surface. DuPont recommends the use of
trivets and hot pads.
Removing Difficult
Spills
Sometimes spills occur and dry on the
countertop. For materials that harden as
they dry (such as gum, food, grease, nail
polish or paint), remove by gently scraping
away the excess with a plastic putty knife.
Permanent markers and inks may adhere to the
surface and should be avoided. Should these
agents come into contact with the surface,
clean first as outlined in Routine Care.
If the stain persists, moisten a cloth with
Saniten 313*, Greased LightningT**, or a
comparable product and rub it into the
stain. Let the cleaning agent sit for 15
minutes and wipe the surface clean with a
cotton cloth. Rinse thoroughly to remove any
cleaner residue.
Avoid exposing Zodiaq® quartz surfaces to
strong chemicals and solvents, especially
paint removers or furniture strippers
containing trichlorethane or methylene
chloride. Keep nail polish remover, bleach,
bluing, permanent markers or inks, and oil
soaps away from Zodiaq®.
While casual exposure to alkaline materials
will not damage Zodiaq®, highly alkaline
(high-pH) cleansers are not recommended when
cleaning Zodiaq®.
If any of the substances listed above come
into Zodiaq®, rinse the exposed surface
immediately and thoroughly with water.
|